Concept Guide

Table Of Contents
iap trusted-branch-db
iap trusted-branch-db
add {mac-address <mac-address>}
allow-all
del {mac-address <mac-address>}
del-all
Description
This command is used to configure an IAP-VPN branch as trusted.
Syntax
Parameter Description
add
Configure an IAP trusted branch entry.
mac-address <mac-address>
MAC-address of an AP.
allow-all
Configure all branches as trusted.
del
Delete an IAP trusted branch entry.
mac-address <mac-address>
MAC-address of AP.
del-all
Delete all trusted branch entries.
Example
The following command configures a specific IAP-VPN branch as trusted:
(host) (config) #iap trusted-branch-db add mac-address 01:01:0e:3e:4c:33
The following is the output of the above command:
Trusted branch added
This following command configures all IAP-VPN branches as trusted:
(host) (config) #iap trusted-branch-db allow-all
The following is the output of the above command:
All IAP+VPN branches are trusted
Related Commands
Command Description
show iap detailed-table
This command displays the IAP trusted branch table
Command History
Release Modification
ArubaOS 6.4 Command introduced
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide iap trusted-branch-db | 399