Reference Guide

229| show ap arm Dell Networking W-Series Instant 6.2.1.0-3.3.0.0|Command Reference Guide
Column Description
New Power
Indicates power values configured on the W-IAP after the ARM change.
Reason
Indicates the reason for changes in channels. For more information about the rea-
son, see the description below the command output.
show ap arm neighbors
The show ap arm neighbors command displays the ARM settings on the W-IAP neighbors. The following example
shows the output of the show ap arm neighbors command:
ARM Neighbors
-------------
bssid essid channel rssi tx-power PL (dB) AP Flags Last Update
----- ----- ------- ---- -------- ------- -------- ------------
6c:f3:7f:45:57:20 7SPOT 1 8 0 0 Passive
6c:f3:7f:56:7e:a0 7SPOT 1 9 0 0 Passive
6c:f3:7f:56:7e:a1 NTT-SPOT 1 12 0 0 Passive
00:24:6c:80:77:c1 NTT-SPOT 1 9 0 0 Passive
6c:f3:7f:45:57:21 NTT-SPOT 1 8 0 0 Passive
6c:f3:7f:44:91:11 NTT-SPOT 1 9 0 0 Passive
00:24:6c:2b:fd:e8 qa-mv-vap3 161 5 9 98 Passive
00:24:6c:80:4d:62 docomo 1 10 0 0 Passive
(Total updates)
---------------
Neighbor Summary:One hop 232 Two hop 0 Current Time: 2013-05-11 04:31:33
The output of this command includes the following information:
Column Description
bssid
Indicates the BSSID of the W-IAP neighbors.
essid
Indicates the ESSID of theW-IAP neighbors.
Channel
Indicates the channels assigned to the W-IAP neighbors
rssi
Indicates the Received signal strength indication (RSSI) values associated with
the ARM channels to which W-IAP neighbors are connected.
tx power
Indicates the transmission power.
PL
Indicates power loss.
AP Flags
Indicates the status of W-IAP neighbors.
Last Update
Displays details of last updates if any.
Total updates
Displays a summary if updates.
show ap arm rf-summary
The show ap arm rf-summary command shows the statistics for all channels monitored by a W-IAP.The following
example shows the output of the show ap arm rf-summary command:
Channel Summary
---------------