Users Guide

Dell Networking W-Series Instant Access Point 6.3.1.1-4.0 | Reference Guide Wireless Messages | 89
Information Messages
Debug Messages
404400 AM:SM: Spectrum: new Wi-Fi device found = [addr:%s] SSID = [ssid:%s] BSSID
[bssid_str:%s] DEVICE ID [did:%d].
Description: This log indicates a new Wi-Fi device is detected by the spectrum radio.
404401 AM:SM: Spectrum: deleting Wi-Fi device = [addr:%s] SSID = [ssid:%s] BSSID
[bssid_str:%s] DEVICE ID [did:%d].
Description: This log indicates a previously detected Wi-Fi device is being deleted due
to inactivity.
404402 AM:SM: Spectrum: new non-Wi-Fi device found = DEVICE ID [did:%u] Type [dytpe:%s]
Signal [sig:%u] Freq [freq:%u]KHz Bandwidth [bw:%u]KHz.
Description: This log indicates a new non-Wi-Fi device is detected by the spectrum
radio.
404403 AM:SM: Spectrum: deleting non-Wi-Fi device = DEVICE ID [did:%d] Type [dtype:%s].
Description: This log indicates a previously detected non-Wi-Fi device is being deleted
due to inactivity.
Table 26 Wireless Information Messages
Message ID Message and Description
400189 Station EDCA parameters configured: AC=[ac:%s] params=[af:%d] [cmin:%d]
[cmax:%d] [t:%d] [acm:%d].
Description: No description available.
400193 VPOOL: STA [mac:%m] at AP [ip:%P]-[bssid:%m]-[name: %s] assigned vlan [vid:%d].
Description: This message indicates VLAN assigned to a new station
Table 27 Wireless Debug Messages
Message ID Message and Description
400100 AP [name:%s]: LED state [state:%x].
Description: No description available.
400101 AP [name:%s]: Unidentified rate [val1:%x] [val2:%x].
Description: No description available.
400110 AP [name:%s]: Delete AP state for bssid [bss:%m]; Deauth [deauth:%d] Clear
[clear:%d].
Description: No description available.
400131 AP [name:%s]: SAPCP Received SAPCP Probe - [band:%s]- [bssis:%m].
Description: No description available.
Table 25 Wireless Notice Message
Message ID Message and Description