Users Guide

60 | User Messages Dell Networking W-Series Instant Access Point 6.3.1.1-4.0 | Reference Guide
524027 Error decoding MPPE send-key (code = [code:%d]).
Description: This shows internal debug messages.
524028 Invalid MPPE send-key length:[len:%d].
Description: This shows internal debug messages.
524030 Invalid Radius Code [radcode:%d].
Description: This shows internal debug messages.
524043 [string:%s]: FT mic=[string1:%s].
Description: This shows internal debug messages.
524044 AES-GCM key size should be either [key1:%d] or [key2:%d].
Description: This shows internal debug messages.
524046 Station UP failed for station [str:%s] [str1:%s].
Description: This shows internal debug messages.
524056 Invalid radius code.
Description: This shows internal debug messages.
524057 Dropping the radius packet for stateful dot1x processing.
Description: This shows internal debug messages.
524058 No Valid NAS IP dropping the request.
Description: This shows internal debug messages.
524059 NAS IP address didn't match the NASIP attribute.
Description: This shows internal debug messages.
524060 No Valid Calling Station ID dropping the request.
Description: This shows internal debug messages.
524061 Could not create a new user entry.
Description: This shows internal debug messages.
524062 Failed to add to the radius request list.
Description: This shows internal debug messages.
524063 Dropping radius response to AP.
Description: This shows internal debug messages.
524064 No matching request fot the response..dropping the pkt.
Description: This shows internal debug messages.
524065 User was deleted before the response came in.
Description: This shows internal debug messages.
524066 No dot1xctx for this response.
Description: This shows internal debug messages.
524067 Failed to process EAP packet from backend.
Description: This shows internal debug messages.
Table 18 User Error Messages
Message ID Message and Description