Users Guide

Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide Wireless Network | 57
You want to use the default security level,
Personal
Perform the following steps:
1. Select the required key options from the Key management drop-down list.
Available options are:
 WPA-2 Personal
 WPA Personal
 Both (WPA-2 & WPA)
 Static WEP
If you have selected Static WEP, then do the following:
 Select appropriate WEP key size from the WEP key size drop-down list.
Available options are 64-bit and 128-bit.
 Select appropriate Tx key from the Tx Key drop-down list. Available
options are 1, 2, 3,and 4.
 Enter an appropriate WEP key and reconfirm.
For more information on encryption and recommended
encryption type, see Chapter 9, “Encryption” .
2. Select a passphrase format from the Passphrase format drop-down list.
Available options are:
 8-63 alphanumeric chars
 64 hexadecimal chars
3. Enter a passphrase in the Passphrase text box and reconfirm.
4. Select the required option from the MAC authentication drop-down list.
Available options are: Enabled and Disabled
When Enabled, user must configure at least one RADIUS server for
authentication server. See “MAC Authentication” on page 109 for further
details.
5. Authentication server 1— Select the required Authentication server
option from the drop-down list. Available options are:
 New— If you select this option, then an external radius server has to be
configured to authenticate the users. For information on configuring an
external RADIUS server, see Chapter 8, “Authentication” .
 InternalServer— If you select this option, then users who are required to
authenticate with the internal RADIUS server must be added. Click the
Users link to add the users.
For information on adding a user, see “Adding a User” on page 203.
6. Reauth interval— When set to a value greater than zero, the Access
Points will periodically reauthenticate all associated and authenticated
clients.
7. Blacklisting— Select Enabled if you want clients to be blacklisted after a
certain number of authentication failures.
8. Max authentication failures— Users who fail to authenticate the number
of times specified here will be dynamically blacklisted. The maximum
value for this entry is 10.
NOTE: Navigate to PEF > Blacklisting in the WebUI to specify the duration of
the blacklisting on the Blacklisting tab of the PEF window.
NOTE: Navigate to PEF > Blacklisting in the WebUI to specify the duration of
the blacklisting on the Blacklisting tab of the PEF window.
9. For Internal users— Click Users to populate the system’s internal
authentication server with users. For information about adding a user, see
“Adding a User” on page 203.
10. Click Upload Certificate and browse to upload a certificate file for the
internal server. See “Certificates” on page 111 for more information.
Table 8 Conditions for Adding a Voice Network— Security Tab (Continued)
If then,