Users Guide

Parameter Description Range Default
denial of service attack
protect-ap-impersonation
Enables protection from AP
impersonation attacks. When AP
impersonation is detected, both the
legitimate and impersonating AP are
disabled using a denial of service
attack.
— —
protect-ssid
Enables use of SSID by valid W-
IAPs only.
— —
protect-valid-sta
Enables protection of valid stations.
When enabled valid stations are not
allowed to connect to an invalid AP.
— —
protect-windows-bridge
Enables protection of a windows
station bridging
— —
rogue-containment
Controls Rogue APs. When rogue
APs are detected, they are not
automatically disabled.
This option automatically shuts
down rogue APs. When this option is
enabled, clients attempting to
associate to an AP classified as a
rogue are disconnected through a
denial of service attack.
— —
signature-airjack
Enables signature matching for the
AirJack frame type.
— —
signature-asleap
Enables signature matching for the
ASLEAP frame type.
— —
signature-deassociation-broadcas
t
Configures signature matching for
the deassociation broadcast frame
type.
— —
signature-deauth-broadcast
Configures signature matching for
the deauth broadcast frame type.
— —
wired-containment
Controls Wired attacks. — —
wireless-containment <type>
Enable wireless containment
including Tarpit Shielding.
Tarpit shielding works by steering a
client to a tarpit so that the client
associates with it instead of the AP
that is being contained.
l deauth-only— Enables
Containment using
deauthentication only .
l none— Disables wireless
deauth-only,
none, tarpit-
all-sta,
tarpit-non-
valid-sta
deauth-
only
Dell Networking W-Series Instant 6.3.1.1-4.0 | CLI Reference Guide ids | 126