Users Guide
(Instant Access Point)(SSID Profile <name>)# content-filtering
(Instant Access Point)(SSID Profile <name>)# hide-ssid
(Instant Access Point)(SSID Profile <name>)# inactivity-timeout <interval>
(Instant Access Point)(SSID Profile <name>)# work-without-uplink
(Instant Access Point)(SSID Profile <name>)# local-probe-req-thresh <threshold>
(Instant Access Point)(SSID Profile <name>)# max-clients-threshold <number-of-clients>
(Instant Access Point)(SSID Profile <name>)# end
(Instant Access Point)# commit apply
Configuring VLAN Settings for a WLAN SSID Profile
If you are creating a new SSID profile, complete the WLANSettings procedure before configuring VLAN. For more
information, see Configuring WLAN Settings for an SSID Profile on page 85.
You can configure VLAN settings for an SSID profile using the Dell W-Instant UI or CLI.
In the Dell W-Instant UI
To configure VLAN settings for an SSID:
1. In the VLAN tab of New WLAN window. The VLAN tab contents are displayed.
Figure 33 VLAN Tab
2. Select any for the following options for Client IP assignment:
l Virtual Controller assigned—On selecting this option, the client obtains the IP address from the Virtual
Controller. The Virtual Controller creates a private subnet and VLAN on the W-IAP for the wireless clients.
The network address translation for all client traffic that goes out of this interface is carried out at the source.
This setup eliminates the need for complex VLAN and IP address management for a multi-site wireless
network. For more information on DHCP scopes and server configuration, see DHCP Configuration on page
230.
l Network assigned—Select this option to obtain the IP address from the network.
3. If the Network assigned is selected, specify any of the following options for the Client VLAN assignment.
Dell Networking W-Series Instant 6.3.1.1-4.0 | User Guide Wireless Network Profiles | 88