Service Manual

show ip dhcp database
show ip dhcp database
Description
This command displays the DHCP server settings.
Usage Guidelines
Use this command to the DHCP server settings.The DHCP server is a built-in server, used for networks in which
clients are assigned IP address by the Virtual Controller.
Example
The following output is displayed for the show ip dhcp database command:
DHCP Subnet :192.0.2.0
DHCP Netmask :255.255.255.0
DHCP Lease Time(m) :20
DHCP Domain Name :example.com
DHCP DNS Server :192.0.2.1
The output of this command provides the following information:
Column Description
DHCP subnet
Indicates the network range for the client IP addresses.
DHCP Netmask
Indicates the subnet mask specified for the IP address range for the DHCP subnet.
DHCP Lease Time(m)
Indicates the duration of DHCP lease. The lease time refers to the duration of
lease that a DHCP-enabled client has obtained for an IP address from a DHCP
server.
DHCP Domian Name
Indicates the domain-name of the DHCP client.
DHCP DNS Server
Indicates the IP address of the DNS server.
Command History
Version Description
Dell Networking W-Series Instant Access Point
6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.2.1.0-3.4 | CLI Reference Guide show ip dhcp database | 309