Service Manual

show ap allowed-channels
show ap allowed-channels <country-code>
Description
This command displays a list of allowed channels for a W-IAP.
Syntax
Parameter Description
<country-code>
Specify a country code to display allowed channels for that country.
Usage Guidelines
Specify the country code for your W-IAP during the initial setup. Changing the country code causes the valid channel
lists to be reset to the defaults for that country.
Example
The following example shows the output of the show ap allowed-channels US command:
Allowed Channels for Country Code "US"
--------------------------------------
PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (indoor) 36 40 44 48 149 153 157 161 165
802.11g (outdoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (outdoor) 149 153 157 161 165
802.11g 40MHz (indoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (indoor) 36-40 44-48 149-153 157-161
802.11g 40MHz (outdoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (outdoor) 149-153 157-161
The output of this command includes the following information:
Parameter Description
PHY Type
Indicates the PHY types for the following bands: types:
l 802.11a
l 802.11g
Allowed Channels
Displays the list of allowed channels for a specific regulatory domain.
Command History
Version Description
Dell Networking W-Series Instant Access Point
6.2.1.0-3.3
This command is introduced.
Dell Networking W-Series Instant 6.2.1.0-3.4 | CLI Reference Guide show ap allowed-channels | 193