Release Notes

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
l value-of - This rule sets the
user role to the value of the
attribute returned. To set a
user role, the value of the
attribute must already be
configured on the W-IAP.
l matches-regular-
expression—The rule is
applied only if the attribute
value matches the regular
expression pattern
specified in Operand. This
operator is available only if
the mac-address-and-
dhcp-options attribute is
selected in the Attribute
drop-down.
set-role-by-ssid
Configures a user role based
on the type of SSID configured.
— —
set-role-mac-auth <mac-only>
Configures a MAC
authentication based user role.
— —
set-role-machine-auth
<machine-only>
<user-only>
Configures a machine
authentication rule.
You can assign different rights
to clients based on whether
their hardware device supports
machine authentication.
Machine authentication is only
supported on Windows devices,
so this can be used to
distinguish between Windows
devices and other devices such
as iPads.
— —
set-role-pre-auth <role>
Configures a pre-authentication
role to allow some access to the
guest users before the client
authentication.
— —
set-role-unrestricted
Configures unrestricted access
control.
— —
set-vlan <attribute>
{{contains|ends-with|
equals|matches-regular-
expression|
not-equals|starts-with}
Assigns a VLAN to the clients.
The first rule that matches the
configured condition is applied.
You can specify any of the
— —