Release Notes

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
TKIP encryption using a
pre-shared key.
l wpa-tkip, wpa2-aes—WPA
with TKIP and WPA2 with
AES encryption.
l wpa-psk-tkip,wpa2-psk-aes
- WPS with TKIP and WPA2
with AES encryption using a
pre-shared key.
l static-wep—WEP with static
keys.
l dynamic-wep—WEP with
dynamic keys.
per-user-bandwidth-limit
<limit>
Configures a bandwidth limit in
Kbps for the SSID users.
NOTE: The bandwidth
contracts can also be applied
per SSID user.
1—65535
Kbps
—
radius-accounting
Enables accounting for the
RADIUS server authentication.
When enabled, the W-IAPs post
accounting information to the
Radius server at the specified
accounting interval.
— Disabled
radius-accounting-mode
{user-association|user-
authentication}
Configures an accounting
mode for the captive portal
users.
You can configure any of the
following modes for accounting:
l user-authentication—
when configured, the
accounting starts only after
client authentication is
successful and stops when
the client logs out of the
network.
l user-association—When
configured, the accounting
starts when the client
associates to the network
successfully and stops
when the client is
disconnected.
— user-
authentication