Release Notes

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
g-min-tx-rate <rate>
Configures the specify the
minimum transmission rate for
the 2.4 GHz band.
1-54 Mbps 1 Mbps
g-max-tx-rate <rate>
Configures the specify the
maximum transmission rate for
the 2.4 GHz band.
1-54 Mbps 54 Mbps
hide-ssid
Hides the SSID. When enabled,
the SSID will not be visible for
the users.
— Disabled
hotspot-profile <name>
Associates a hotspot profile
with the WLAN SSID profile.
— —
inactivity-timeout <interval>
Configures a timeout value for
the inactive client sessions.
When a client session is
inactive for the specified
duration, the session expires
and the clients are required to
log in again.
60-86400
seconds
1000
index <idx>
Assigns an index value for the
SSID.
— —
l2-auth-failthrough
Allows the clients to use 802.1X
authentication when MAC
authentication fails.
— Disabled
leap-use-session-key
Allows the users to derive
session keys for Lightweight
Extensible Authentication
Protocol (LEAP) authentication.
Configure this command for old
printers that use dynamic WEP
and if you do not want use a
session key from the RADIUS
Server to derive pair wise
unicast keys.
— Disabled
local-probe-req-thresh
<threshold>
Configures a Received signal
strength indication (RSSI)
threshold value to limit the
number of incoming probe
requests.
When enabled, this command
controls the system response to
0-100 dB —