Release Notes

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
connect to the Internet, but
cannot communicate with each
other, and the routing traffic
between the clients is sent to
the upstream device to make
the forwarding decision.
disable
Disables the SSID. By default
all SSIDs are enabled.
— —
dmo-channel-utilization-
threshold
<threshold>
Sets a threshold for DMO
channel utilization. W-IAP
sends multicast traffic over the
wireless link.
1–100
percentage
value
90
dot11k
Enables 802.11k roaming on
the SSID profile.
The 802.11k protocol enables
W-IAPs and clients to
dynamically measure the
available radio resources.
When 802.11k is enabled, W-
IAPs and clients send neighbor
reports, beacon reports, and
link measurement reports to
each other.
— —
dot11r
Enables 802.11r on the SSID
profile.
802.11r or fast BSS transition
(FT) is an IEEE standard that
permits continuous
connectivity across wireless
devices during client mobility.
Fast BSS Transition
mechanism minimizes the
delay in roaming when a client
transitions from one BSS to
another within the
same cluster.
Fast BSS Transition is
operational only if the wireless
client supports 802.11r
standard. If the client does
support 802.11r standard, it
falls back to normal WPA2
authentication method.
— —