Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
l Fraklin Wireless u770
l Huawei 3276s-150
l MC551L
l Pantech UML295
l Pantech UML290
When UML290 runs in auto detect mode, the modem can switch from 4G network to 3G network or vice-
versa based on the signal strength. To configure the UML290 for the 3G network only, manually set the USB
type to pantech-3g. To configure the UML290 for the 4G network only, manually set the 4G USB type to
pantech-lte.
Example 1
The following example configures a cellular uplink profile:
(Instant AP)(config) # cellular-uplink-profile
(Instant AP)(cellular-uplink-profile)# usb-type sierra-net
(Instant AP)(cellular-uplink-profile)# usb-dev 0x0f3d68aa
(Instant AP)(cellular-uplink-profile)# usb-init 3,broadband
(Instant AP)(cellular-uplink-profile)# end
(Instant AP)# commit apply
Example 2
The following example configures a cellular uplink profile for UML295 Country US and ISP Pantech:
(Instant AP)(config) # cellular-uplink-profile
(Instant AP)(cellular-uplink-profile)# usb-type rndis-uml295
(Instant AP)(cellular-uplink-profile)# usb-dev 0x10a96064
(Instant AP)(cellular-uplink-profile)# usb-tty ttyACM0
(Instant AP)(cellular-uplink-profile)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and cellular uplink profile configuration
sub-mode