Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
show ap client-match-triggers
show ap client-match-triggers
Description
This command displays the configuration conditions that trigger client match events and actions for the clients
associated with a W-IAP.
Usage Guidelines
Use this command to view the clients match trigger records. When the client match feature is enabled on a IAP,
the W-IAP measures the RF health of its associated clients. Based on the following trigger conditions, the clients
are moved from one AP to another for better performance and client experience.
l Dynamic Load Balancing:
l Sticky Clients
l Band Steering
l Channel Utilization
l Client Capability Match
For more information on client match and client match trigger conditions, see Dell Networking W-Series Instant
6.4.2.0-4.1.1 User Guide.
Example
The following example shows the output of the show ap client-match-triggers command:
Client Match Triggers
---------------------
Station PHY Target_AP Reason STA_CAP rssi chan ccnt
cutil g_ccnt RSSI CHAN CCNT ROOM CUTIL
------- --- --------- ------ ------- ---- ---- ----
----- ------ ---- ---- ---- ---- ----- ---
A_CCNT Time
--- ----
00:15:00:5e:7e:3c 0 9c:1c:12:3a:e9:70 Dynamic Load Balancing - 25 36+ 12
- - 44 44+ 2 - - - 3h:11m:19s
5a:15:00:00:00:16 1 9c:1c:12:3a:e9:10 Sticky Client - 17 6 -
- - 34 40- - - - - 2h:11m:40s
00:15:00:5e:77:c8 0 9c:1c:12:3a:e9:10 Dynamic Load Balancing - 36 48- 19
- - 38 40- 0 - - - 2h:11m:34s
a4:4e:31:97:da:74 0 9c:1c:12:3a:e9:10 Dynamic Load Balancing - 31 48- 19
- - 42 40- 0 - - - 2h:11m:34s
00:15:00:5b:72:1c 1 9c:1c:12:3a:e9:60 Sticky Client - 24 5 -
- - 35 6 - - - - 1h:29m:37s
5a:12:00:00:00:11 0 9c:1c:12:3a:e6:70 Dynamic Load Balancing - 15 44+ 9
- - 35 40- 9 - - - 1h:9m:41s
Total 6 Records
The output of this command displays client match trigger records with details such as station MAC, target AP
MAC, trigger condition and so on.