Concept Guide

show ap active
show ap active [ap-name <ap-name>|{arm-edge dot11a|dot11g|voip-only}|dot11a|dot11g|essid
<essid>|ip-addr <ip-addr>|ip6-addr <ip6-addr>|{type access-point|air-monitor|(sensor
dot11a|dot11g|voip-only)}|voip-only
Description
Show all active APs registered to a controller.
Syntax
Parameter Description
ap-name <ap-name>
View data for an AP with a specified name.
arm-edge
Show the state of ARM edge APs.
counters
Show the counters.
dot11a
Show 802.11a radio information.
dot11g
Show 802.11g radio information.
voip-only
Show AP information filtered by associated/active VoIP clients.
essid <essid>
View data for a specific ESSID (Extended Service Set Identifier). An Extended
Service Set Identifier (ESSID) is a alphanumeric name that uniquely identifies a
wireless network. If the name includes spaces, enclose the ESSID in quotation
marks.
ip-addr <ip-addr>
View data for an AP with a specified IP address by entering an IP address in
dotted-decimal format.
ip6-addr <ip6-addr>
View data for an AP with a specified IPv6 address.
type
Show AP information filtered by type of AP.
access-point
Show information for Access Points only.
air-monitor
Show information for Air Monitors only.
ap-monitor
Show information for AP Monitors only.
spectrum
Show only Spectrum Sensor information.
voip-only
Show AP information filtered by associated/active VoIP clients.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap active | 937