Concept Guide

Parameter Description Range Default
client-aware
If the Client Aware option is
enabled, the AP does not
change channels if there is
active client traffic on that
AP. If Client Aware is
disabled, the AP may change
to a more optimal channel,
but this change may also
disrupt current client traffic.
— enabled
client match
The client match feature
helps optimize network
resources by balancing
clients across channels,
regardless of whether the AP
or the controller is
responding to the wireless
client’s probe requests.
If enabled, the controller
compares whether or not an
AP has more clients than its
neighboring APs on other
channels. If an AP’s client
load is at or over a
predetermined threshold as
compared to its immediate
neighbors, or if a
neighboring Dell AP on
another channel does not
have any clients, load
balancing will be enabled on
that AP. This feature is
enabled by default
— enabled
clone
Name of an existing ARM
profile from which
parameter values are
copied.
— —
cm-band-a-min-
signal <cm-band-a
-min-signal>
Minimum signal level
required for the targeted A
band radio in a Client Match
band steer move (-dBm).
— 75
cm-band-g-max
-signal <cm-band-g
-max-signal>
Maximum signal level of the
G band radio that can trigger
a Client Match band steer
move (-dBm)
— 45
cm-dot11v
Client Match steers using
802.11v BSS Transition
Management.
— enabled
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf arm-profile | 718