Concept Guide

mgmt-server profile
wlan
mgmt-server profile <profile-name>
airgroupinfo-enable
clone
inline-ap-stats
inline-auth-stats
inline-dhcp-stats
inline-dns-stats
location-enable
misc-enable
monitored-info-del-enable
monitored-info-enable
monitored-info-snapshot
monitored-stats-enable
no
sessions-enable
stats-enable
tag-enable
uccmonitoring-enable
wids-event-info-enable
Description
Configure a management server profile on the controller for an W-AirWave management server or for an
Analytics Location Engine (ALE) that should receive Advanced Monitoring (AMON) protocol messages filtered
based on the profile settings. The default profiles provided for the AMPserver (default-amp) and ALE (default-
ale) are editable using this command.
Syntax
Parameter Description
<profile-name>
Associate the controller to an W-AirWave management server by
entering the IP address of the W-AirWaveserver.
clone
Use this command to copy from another configuration profile.
airgroup-enable
If enabled, the messages related to the AirGroup feature will be sent
to the management server.
inline-ap-stats-disable
Disables inline monitoring stats from the AP, By default, this statistic
is enabled.
inline-auth-disable
Disables inline monitoring stats related to authentication. By default,
this statistic is enabled.
inline-dhcp-disable
Disables inline monitoring stats of DHCP. By default, this statistic is
enabled.
inline-dns-disable
Disables inline monitoring stats of DNS. By default, this statistic is
enabled.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide mgmt-server profile | 621