Concept Guide

450| interface fastethernet | gigabitethernet Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
<name>
Name of a bandwidth contract
configured with the aaa
bandwidth-contract
command. If you specify a
bandwidth contract name
before you specify an
application or application
category, the bandwidth
contract is applied to all
downstream or upstream
traffic.
app <name>
Name of the application to
which the bandwidth contract
is applied. For a complete list
of supported applications,
issue the command show dpi
application all.
— —
appcategory <name>
Name of the application
category to which the
bandwidth contract is applied.
For a complete list of
supported applications, issue
the command show dpi
application category all.
— —
downstream
Apply the bandwidth contract
to downstream traffic.
— —
upstream
Apply the bandwidth contract
to upstream traffic.
— —
exclude
<app>|<appcategory>
Use this parameter to exclude
application or application
category traffic from a
bandwdth contract.
description
String that describes this
interface.
— —
duplex
Transmission mode on the
interface: full or half-duplex or
auto to automatically adjust
transmission.
auto/full/half auto
ip access-group
Applies the specified access
control list (ACL) to the
interface. Use the ip access-
list command to configure an
ACL.
NOTE: This parameter
requires the PEFNG license.
— —