Concept Guide

ids signature-profile
ids signature-profile <name>
bssid <macaddr>
clone <profile>
dst-mac <macaddr>
frame-type {assoc|auth|beacon|control|data|deauth|disassoc|mgmt|probe-request|probe-
response
no ...
payload <pattern> [offset <number>]
seq-num <number>
src-mac <macaddr>
Description
This command configures signatures for wireless intrusion detection.
Syntax
Parameter Description Default
<profile>
Name that identifies an instance of the profile. The name
must be 1-63 characters.
“default”
bssid
BSSID field in the 802.11 frame header. —
clone
Name of an existing IDS signature profile from which
parameter values are copied.
—
dst-mac
Destination MAC address in the 802.11 frame header. —
frame-type
Type of 802.11 frame. For each type of frame, further
parameters can be specified to filter and detect only the
required frames.
—
assoc
Association frame type
auth
Authentication frame type
beacon
Beacon frame type
control
All control frames
data
All data frames
deauth
Deauthentication frame type
disassoc
Disassociation frame type
mgmt
Management frame type
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ids signature-profile | 430