Concept Guide

enable bypass
enable bypass
no enable bypass
Description
This config mode command allows you to bypass the enable password prompt and go directly to the privileged
command mode.
Usage Guidelines
Use this command when you want to access the privileged mode directly after logging in to the controller and
not be prompted to enter an enable mode password.
To restore the enable mode password prompt, use the config mode command. no enable bypass.
Example
The following example allows bypass the enable mode password prompt.
(host) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(host) (config) #enable bypass
(host) (config) #
Command History
Version Modification
ArubaOS 6.0 Command introduced
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating
system
Config mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide enable bypass | 357