Concept Guide

ap-rename
ap-rename {ap-name <name>|serial-num <num>|service-tag <service-tag>|wired-mac <macaddr>}
<new-name>
Description
This command changes the name of an AP to the specified new name.
Syntax
Parameter Description
ap-name
Current name of the AP.
serial-num
Serial number of the AP.
service-tag
Service tag of the AP.
wired-mac
MAC address of the AP.
<new-name>
New name for the AP. The name must be 1-63 characters.
NOTE: You cannot use quotes (“) in the AP name.
Usage Guidelines
An AP name must be unique within your network.
This command automatically reboots the AP.
Example
The following command renames an AP:
(host) (config) #ap-rename wired-mac 00:0f:1e:11:00:00 building3-lobby
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.4.2.0 The service-tag parameter was introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap-rename | 248