Concept Guide

Parameter
Description Range Default
request-info <request-info>
This option is used to indicate
the contents of the Request
Information IE that could be
present in the Beacon Report
Request frame. The Request
Information IE is present for all
Measurement Modes except the
'Beacon Table' mode. It consists
of a list of Element IDs that
should be included by the client
in the response frame.
Any
valid
element
ID in the
x/y/z
format.
For
exampl
e,
0/21/22.
—
rpt-condtion <rpt-condition>
This option is used to indicate
the value for the "Reporting
Condition" field in the Beacon
Reporting Information sub-
element present in the Beacon
Report Request frame.
0 - 255 0
rpt-detail
This option is used to indicate
the value for the "Detail" field in
the Reporting Detail sub-element
present in the Beacon Report
Request frame.
— Disabled
ssid <ssid>
A unique character string
(sometimes referred to as a
network name), consisting of no
more than 32 characters. The
SSID is case-sensitive (for
example, WLAN- 01).
— —
Usage Guidelines
The Beacon Report Request profile is configured under the 802.11K profile.
Example
The following commands configure the parameters under the bcn-rpt-req-profile.
(host) (config) #wlan bcn-rpt-req-profile default
(host) (Beacon Report Request Profile "default") #channel 9
(host) (Beacon Report Request Profile "default") #interface 1
(host) (Beacon Report Request Profile "default") #no measure-dur-mandatory
(host) (Beacon Report Request Profile "default") #measure-duration 100
(host) (Beacon Report Request Profile "default") #measure-mode active-all-ch
(host) (Beacon Report Request Profile "default") #random-interval 100
(host) (Beacon Report Request Profile "default") #reg-class 12
(host) (Beacon Report Request Profile "default") #rpt-condition 2
(host) (Beacon Report Request Profile "default") #no rpt-detail
(host) (Beacon Report Request Profile "default") #request-info 0/21/22
(host) (Beacon Report Request Profile "default") #ssid aruba-ap
Command History
This command is introduced in ArubaOS 6.2.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan bcn-rpt-req-profile | 2274