Concept Guide

shutdown
shutdown all
Description
This command disables all interfaces on the controller.
Usage Guidelines
This command stops all traffic through the physical ports on the controller. The console port remains active.
Use this command only when you have physical access to the controller, so that you can continue to manage
using the console port.
To shut down an individual interface, tunnel, or VLAN, use the shutdown option within the interface
command. To restore the ports, use the no shutdown command.
Example
The following example shuts down all physical interfaces on the controller.
(host) (config)#shutdown all
Command History
This command was introduced in ArubaOS 1.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master or local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide shutdown | 2156