Concept Guide

2075| show wlan hotspot anqp-ip-addr-avail-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
--------- -----
IPv4 Address Availability Type public
IPv6 Address Availability Type not-available
The output of this command includes the following parameters:
Parameter Description
IPv4 Address
Availability Type
Indicates the availability of an IPv4 network. This parameter can display any of the
following values:
l availability-unknown: Network availability cannot be determined.
l not-available : Network is not available.
l port-restricted : Network has some ports restricted ( for example, the network
blocks port 110 to retrict POP mail).
l port-restricted-double-nated : Network has some ports restricted and multiple
routers performing network address translation.
l port-restricted-single-nated : Network has some ports restricted and a single
router performing network address translation.
l private-double-nated : Network is a private network with multiple routers doing
network address translation.
l private-single-nated : Network is a private network a single router doing network
address translation.
l public : Network is a public network
IPv6 Address
Availability Type
Indicates the availability of an IPv6 network. This parameter can display any of the
following values:
l available : An IPv6 network is available.
l availability-unknown: Network availability cannot be determined.
l not-available : Network is not available.
Related Commands
wlan hotspot anqp-ip-addr-avail-profile
.Command History
The command was introduced in ArubaOS 6.4
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or
local controllers