Concept Guide

show rrm dot11k ap-channel-report
show rrm dot11k ap-channel-report [ap-name <name-of-an-ap> |
bssid <bssid-of-an-ap> | ip-addr <ip-address-of-an-ap> | ip6-addr <ip-addr> | essid
<essid>]
Description
Displays the channel information gathered by the AP. You can either specify an ap-name, bssid or ip-address of
an AP to see more details.
Syntax
Parameter Description
ap-name
Enter the name of the AP.
bssid
Enter the BSSID address of the AP.
ip-addr
Enter the IP address of the AP.
ip6-addr
Enter the IPv6 address of the AP
essid
Entries in the IPv4 user-table that are associated to the specified ESSID. If
the ESSID includes spaces, you must enclose it in quotation marks.
Example
The output of this command shows the channel information for r-wing-94:94.
(host) # show rrm dot11k ap-channel-report ap-name r-wing-94
802.11K AP Channel Report Details
----------------------------------
Freq Band Channel List
--------- ------------
2.4 GHz 11,
5 GHz 36, 40, 157, 161, 165,
Num Entries:2
Command History
This command was available in ArubaOS 3.4
Command Information
Platforms
Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show rrm dot11k ap-channel-report | 1880