Concept Guide

show ids general-profile
show ids general-profile <profile-name>
Description
Display an IDS General profile.
Syntax
Parameter Description
<profile-name>
Name of an IDS General profile.
Usage Guidelines
Issue this command without the <profile-name> parameter to display the IDS General profile list. Include a
profile name to display detailed configuration information for that profile.
Examples
The example below shows that the controller has four configured General profiles.
(host) (config) # show ids general-profile
IDS General Profile List
------------------------
Name References Profile Status
---- ---------- --------------
default 2
helen 0
wired-lb 1
Wizard-test2 1
Total:4
In the example above, the Reference column indicates the number of references to the profile named in the
Name column. The Profile Status column is blank unless the rule is predefined.
The example below displays the settings for the profile Michael.
(host) (config) #show ids general-profile Michael
IDS General Profile "Michael"
---------------------------
Parameter Value
--------- -----
Adhoc AP Max Unseen Timeout 180 sec
Adhoc (IBSS) AP Inactivity Timeout 5 sec
AP Inactivity Timeout 20 sec
AP Max Unseen Timeout 600 sec
Frame Types for RSSI calculation ba pr dlow dnull mgmt ctrl
IDS Event Generation on AP none
Max Monitored Stations 1024
Max Unassociated Stations 256
Min Potential AP Beacon Rate 25 %
Min Potential AP Monitor Time 2 sec
Mobility Manager RTLS false
Monitored Device Stats Update Interval 0 sec
Packet SNR Threshold 0
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ids general-profile | 1528