Concept Guide

Parameter Description
bwm
Displays the following bandwidth management table
entry statistics:
l Type: Indicates whether the contract is a control
plane denial-of-service contract (0), a contract
configured through the bandwidth management
WebUI or CLI Interfaces (1), or a contract for
multicast traffic generated by the controller(2).
l Cont ID: An ID number unique to each contract.
l Rate: Contract traffic rate, in 256-byte
packets/second.
l Policed: The number of packets dropped because
the policy was applied.
l Avail Credits: This value is the (contract rate)/32,
and is used for internal debugging purposes.
l Queued Pkts/ Bytes: Number of bytes/pkts
currently being queued.
l Flags: Flags applied to the contract.
l CPU: A value in this column indicates that the
traffic passed through the slowpath CPU, and is
used for internal debugging purposes.
l Status: Indicates whether the bandwidth contract
has been successfully applied.
ap-name
<ap-name>
View a bandwidth contract for a specific AP.
ip-addr
<ip-addr>
View a bandwidth contract for an AP with the specified
IP address.
table
Display a table of all configured bandwidth contracts.
type
Display only bandwidth contracts of a specific type (0,1
or 2).
compression
Displays datapath compression statistics. By default,
the combined statistics of all CPUs are shown.
cp-bwm
Displays the data path CP bandwidth management
table information.
crypto counters
Displays crypto parameter statistics including crypto,
IPsec, PPTP, WEP, TKIP, AESCCM encryption and
decryptions, WEP CRC, crypto hardware, XSEC, DOT1X,
and L2TP information.
debug
Displays datapath debug details. These are low-level
datapath details.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show datapath | 1434