Concept Guide

show ap system-profile
show ap system-profile <profile>
Description
Show an AP’s system profile settings.
Syntax
Parameter Description
<profile>
Name of a system profile.
Examples
The output of the command below shows the current configuration settings for the default
system profile.
(host) #show ap system-profile default
AP system profile "default"
---------------------------
Parameter Value
--------- -----
RF Band g
RF Band for AM mode scanning all
Native VLAN ID 10
Tunnel Heartbeat Interval 1
Session ACL ap-uplink-acl
Corporate DNS Domain N/A
SNMP sysContact N/A
LED operating mode (11n/11ac APs only) normal
LED override Disabled
Driver log level emergencies
SAP MTU N/A
RAP MTU 1200 bytes
LMS IP N/A
Backup LMS IP N/A
LMS IPv6 N/A
Backup LMS IPv6 N/A
LMS Preemption Disabled
LMS Hold-down Period 600 sec
LMS ping interval 20
Remote-AP DHCP Server VLAN N/A
Remote-AP DHCP Server Id 192.168.11.1
Remote-AP DHCP Default Router 192.168.11.1
Remote-AP DHCP DNS Server N/A
Remote-AP DHCP Pool Start 192.168.11.2
Remote-AP DHCP Pool End 192.168.11.254
Remote-AP DHCP Pool Netmask 255.255.255.0
Remote-AP DHCP Lease Time 0 days
Remote-AP uplink total bandwidth 0 kbps
Remote-AP bw reservation 1 N/A
Remote-AP bw reservation 2 N/A
Remote-AP bw reservation 3 N/A
Remote-AP Local Network Access Disabled
Bootstrap threshold 8
Double Encrypt Disabled
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap system-profile | 1325