Concept Guide

1128| show ap debug radio-stats Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Tx HT40 Dfs IMM WAR
Number of times the HT 40 RX Clear Hang immunity workaround
was employed.
Tx HT40 Dfs HT20 WAR
Number of times the HT 20 RX Clear Hang immunity workaround
was employed.
Tx MAC/BB Hang Stuck
Number of times a workaround was employed for potential
beacons stuck due to MAC or base-band stuck conditions.
Tx Mgmt Bytes
Total management frame bytes transmitted.
Tx Beacons Bytes
Total number of Beacon frame bytes transmitted.
Tx Data Frames Dropped
Number of transmitted data frames that were dropped.
Tx AMSDU pkt count
Total number of AMSDU bytes transmitted.
Rx Last SNR
The last recorded signal-to-noise ratio.
Rx Last SNR CTL0
The signal-to-noise ratio for the last received data packet on the
primary (control) channel 0. This parameter is only displayed for
APs operating in 40 Mhz mode.
Rx Last SNR CTL1
The signal-to-noise ratio for the last received data packet on the
secondary (control) channel 1. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR CTL2
The signal-to-noise ratio for the last received data packet on the
secondary (control) channel 2. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR EXT0
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 0. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR EXT1
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 1. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR EXT2
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 2. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last ACK SNR EXT0
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 0. This parameter is only displayed
for APs operating in 40 Mhz mode.