Concept Guide

1034| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Legacy stations
Shows if the AP has
enabled or disabled the
legacy stations option,
which controls whether or
not legacy (non-HT)
stations are allowed to
associate with the AP’s
SSID. By default, legacy
stations are allowed to
associate.
NOTE: This setting has no
effect on a BSS in which
HT support is not
available.
Allow weak encryption
Shows if the AP has
enabled or disabled the
weak encryption option.
The use of TKIP or WEP for
unicast traffic forces the
use of legacy
transmissions rates.
Disabling this mode
prevents the association
of stations using TKIP or
WEP for unicast traffic.
This mode is disabled by
default.
Virtual AP enable
Wireless LAN profiles
configure WLANs in the
form of virtual AP profiles.
This parameter shows if
the AP has enabled or
disabled virtual APs.
Allowed band
Shows the band(s) on
which to use the virtual
AP:
l a—802.11a band only
(5 GHz)
l g—802.11b/g band
only (2.4 GHz)
l all—both 802.11a and
802.11b/g bands (5
GHz and 2.4 GHz)
VLAN
Shows the VLAN(s) into
which users are placed in
order to obtain an IP
address.