Service Manual

104 |Traps Dell Networking W-Series Instant Access Point 6.2.1.0-3.4 | MIB Reference Guide
wlsxNodeRateAnomalyAP
wlsxNodeRateAnomalySta
wlsxEAPRateAnomaly
wlsxSignalAnomaly
Objects {wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID,
wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress,
wlsxTrapAPRadioNumber, wlsxTrapAPLocation}
Status current
Description This trap indicates that an AP detected frames transmitted or received by an
access point, which exceed the configured IDS rate threshold.
For more information check:
http://www.wve.org/entries/show/WVE-2005-0052
http://www.wve.org/entries/show/WVE-2005-0045
http://www.wve.org/entries/show/WVE-2005-0046
http://www.wve.org/entries/show/WVE-2005-0047
http://www.wve.org/entries/show/WVE-2005-0048
Objects {wlsxTrapTime, wlsxTrapFrameType, wlsxTrapNodeMac, wlsxTrapSnr,
wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation}
Status current
Description This trap indicates that an AP detected frames transmitted or received by a
node, which exceed the configured IDS rate threshold.
Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,
wlsxTrapAPLocation, wlsxTrapAPChannel}
Status current
Description This trap indicates that the rate of EAP Handshake packets
received by an AP has exceeded the configured IDS EAP Handshake rate threshold.
For more information check http://www.wve.org/entries/show/WVE-2005-0049
Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,
wlsxTrapAPLocation, wlsxTrapAPChannel }
Status current
Description This trap indicates that an AM detected a Signal Anomaly.