Release Notes

3. Click the Monitoring tab. The Monitoring tab details are displayed.
4. Enter the IP address of the TFTP server in the TFTP Dump Server text box.
5. Click OK.
In the CLI
To configure a TFTP server:
(Instant AP)(config)# tftp-dump-server <IP-address>
(Instant AP)(config)# end
(Instant AP)# commit apply
Running Debug Commands from the UI
To run the debugging commands from the UI:
1. Navigate to More>Support at the top right corner of the Instant main window. The Support window is
displayed.
2. Select the required option from the Command drop-down list.
3. Select All Access Points or Instant Access Point(VC) from the Target drop-down list.
4. Click Run. When you run debug commands and click Save, the output of all the selected commands is
displayed in a single page.
Support Commands
You can view the following information for each access point in the cluster using the support window:
l AP 3G/4G Status— Displays the cellular status of the W-IAP.
l AP 802.1X Certificate— Displays the CA certificate and server certificate for the Virtual Controller.
l AP 802.1X Statistics— Displays the 802.1X statistics of the W-IAP.
l AP Access Rule Table— Displays the list of ACL rules configured on the W-IAP.
l AP Inbound Firewall Rules—Displays inbound firewall rules configured on the W-IAP
l AP Active— Displays the list of active APs in Instant network.
l AP Airgroup Cache— Displays the Bonjour Multicast DNS (mDNS) records for the W-IAP.
l AP Airgroup CPPM Entries— Displays the AirGroup CPPM policies of the registered devices.
l AP Airgroup CPPM Servers— Displays the AirGroup CPPM server information.
l AP Airgroup Debug Statistics— Displays the debug statistics for the W-IAP.
l AP Airgroup Servers— Displays information about the Bonjour devices which supports AirPrint and
AirPlay services for the W-IAP.
l AP Airgroup User— Displays the IP/MAC address, device name, VLAN, type of connection of the Bonjour
devices for the W-IAP.
l AP Allowed Channels— Displays information of the allowed channels for the W-IAP.
l AP Allowed MAX-EIRP— Displays information on the maximum EIRP settings that can be configured on a
W-IAP serving in a specific regulatory domain.
l AP All Supported Timezones— Displays all the supported time zones of Instant.
l AP ARM Bandwidth Management— Displays bandwidth management information for the W-IAP.
l AP ARM Channels— Displays ARM channel details for the W-IAP.
l AP ARM Configuration— Displays ARM configuration details for the W-IAP.
l AP ARM History— Displays the channel history and power changes due to Adaptive Radio Management
(ARM) for the W-IAP.
Dell Networking W-Series Instant 6.4.2.0-4.1.1 | User Guide Monitoring Devices and Logs | 346