Concept Guide

7| The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Command Description
show ap arm history The Result column is introduced to the output of this command to
indicate the status of the requested change in channel or EIRP by
ARM.
show ap debug port status The Portfast parameter is introduced.
show ap port status The Portfast parameter is introduced.
show ap regulatory-domain-
profile
The Valid 802.11a 160MHz channel group parameter is introduced.
show ap system-profile The following parameters are introduced as part of the output of this
command:
l Secondary Master IP/FQDN
l Disable RAP Tftp Image Upgrade
l AP Console Protection
l AP Console Password
show crypto-local isakmp The allow-via-subnet-routes parameter is introduced.
show datapath The following IP Classification related parameters are introduced:
l ip-geolocation [counters]
l ip-reputation [counters|rtc]
l session ip-classification
show ip access-list The global-geolocation-acl is introduced.
show firewall The IP classification parameter is introduced.
show rf arm-profile The following parameters are introduced as part of the output of this
command:
l 160MHz-support
l Interfering AP Weight
l Dynamic Bandwidth Switch
l Dynamic Bandwidth Switch Wait Time (sec)
l Dynamic Bandwidth Switch Triggering Indicator CCA ibss
Threshold (%)
l Dynamic Bandwidth Switch Triggering Indicator Beacon
Failed Threshold
l Dynamic Bandwidth Switch Triggering Indicator CCA intf
Threshold (%)
l Dynamic Bandwidth Switch Clear Time (min)