Reference Guide

48 | System Messages Dell Networking W-Series Instant Access Point 6.2.1.0-3.4 | Syslog Messages Reference Guide
341017 AP is adding auth server-[ipaddr:%s], as_port-[as_port:%d], acctport-[acctport:%d].
Description: The AP is configuring auth server.
341018 Auth server NAS ip-[ipaddr:%s].
Description: The AP is configuring auth server.
341019 Auth server source ip-[ipaddr:%s].
Description: The AP is configuring auth server.
341020 Add termination server-[ipaddr:%s].
Description: The AP is configuring termination server.
341021 Add LDAP server-[ipaddr:%s], add-[flag:%d].
Description: The AP is configuring LDAP server.
341035 Set boot partition for AP: convert_ap-[convert_ap:%d], partition id-[part_id:%d].
Description: The AP is setting boot partition id.
341059 [func:%s]: can't find index for role-[name:%s].
Description: The AP is setting acl.
341060 [func:%s]: unknown client subnet type-[type:%d] for [ip:%x]/[mask:%x].
Description: The AP is setting acl.
341061 No SSID for vlan-[vlan:%d] for [ip:%x]/[mask:%x].
Description: The AP is setting acl.
341062 No space for vlan-[vlan:%d] for [ip:%x]/[mask:%x].
Description: The AP is setting acl.
341065 Activated tunnel route [desk:%x]/[mask:%x] to [dip:%x]/[ifindex:%x] usecnt-[cnt:%d].
Description: The AP is setting kernal route.
341066 Activated tunnel route [desk:%x]/[mask:%x] to [dip:%x]/[ifindex:%x] usecnt-[cnt:%d].
The AP is setting kernal route.
341069 Corp tunnel [sip:%x] to [dip:%x]/[eip:%x]/[ifindex:%d] is up.
Description: The AP is creating tunnel.
341071 Corp tunnel [sip:%x] to [dip:%x]/[eip:%x]/[ifindex:%d] is down.
Description: The AP is creating tunnel.
341073 AP derived acl for post auth role-[name:%s], idx-[idx:%u], acl-[acl:%u].
Description: The AP is creating SSID.
341075 [func:%s] AP can't find default post auth acl for SSID-[name:%s].
Description: The AP is creating SSID.
341076 Using default acl-[acl:%d] for SSID-[name:%s].
Description: The AP is creating SSID.
341077 AP add new acl-[name:%s], idx-[id:%d], vlan-[vid:%d], caleaOn-[on:%d].
Description: The AP is configuring ACL.
Table 16 Information System Messages (Continued)
Message ID Message and Description