Service Manual

464 | wlan ssid-profile Dell Networking W-Series Instant 6.2.1.0-3.4 | CLI Reference Guide
Command/Parameter Description Range Default
posting accounting
information as RADIUS
INTERIM accounting
records to the RADIUS
server.
When configured, the W-
IAP sends interim-update
messages with current user
statistics to the RADIUS
server at regular intervals.
value in
minutes
radius-reauth-interval
<minutes>
Configures an interval at
which W-IAPs can
periodically reauthenticate
all associated and
authenticated clients.
Any
integer
value in
minutes
—
rf-band {2.4|5| all}
Configures the radio
frequency band on which
this SSID will be broadcast.
You can select either
2.4GHz, 5 GHz, or all to
specify both bands.
2.4 GHz, 5
GHz, all
all
server-load-balancing
Enables load balancing
across two RADIUS servers
if two authentication servers
are configured for the SSID.
— Enabled
set-role <attribute>
{{equals| not-equal|starts-with|
ends-with|contains| matches-regular-
expression}
<operator> <role>| value-of}
Assigns a user role to the
clients. The first rule that
matches the configured
condition is applied.
You can set any of the
following conditions:
l contains — The rule is
applied only if the
attribute value contains
the specified string.
l ends-with — The rule is
applied only if the
attribute value ends with
the specified string.
l equals — The rule is
applied only if the
attribute value is equal
to the specified string.
l not-equals — The rule is
applied only if the
attribute value is not
equal to the specified
string.
l starts-with — The rule is
applied only if the
attribute value begins
with the specified string.
— —