Service Manual

430 | vpn hold-time DellNetworking W-Series Instant 6.2.1.0-3.4 | CLI Reference Guide
vpn hold-time
vpn hold-time <seconds>
no...
Description
This command configures the time interval after which the W-IAP can switch over to the primary host when
preemption is enabled.
Syntax
Parameter Description Range Default
vpn hold-time
<seconds>
Configures a time period in seconds after which the
W-IAPs can switch to primary VPN server.
— —
no…
Removes the configuration. — —
Usage Guidelines
Use this command to configure a period to hold on switching to the primary server when pre-emption is enabled.
Example
The following example configures a hold-time to switch to the primary host server:
(Instant Access Point)(config)# hold-time <seconds>
(Instant Access Point)(config)# end
(Instant Access Point)# commit apply
Command History
Version Description
Dell Networking W-Series Instant Access
Point 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode