Service Manual

show log rapper
show log rapper
Description
This command show details the VPN connection logs in detail.
Syntax
No parameters
Example
The following example shows the output of show log rapper} command.
May 10, 09:14:42: get_ike_version: Use IKE Version 2
May 10, 09:14:42: papi_init papifd:5 ack:11
IKE_EXAMPLE: Starting up IKE server
setup_tunnel
May 10, 09:14:42: IKE_init: ethmacstr = D8:C7:C8:CB:D4:20
Initialized Timers
IKE_init: completed after (0.0)(pid:6775) time:2013-05-10 09:14:42
seconds.
May 10, 09:14:42: RAP using default certificates
May 10, 09:14:42: Before getting Certs
May 10, 09:14:42: TPM enabled
May 10, 09:14:42: CA_MGMT_EXAMPLE_computeHostKeys init cert-len 0
May 10, 09:14:42: Factory Device Cert is /tmp/deviceCerts/certifiedKeyCert.der
May 10, 09:14:42: Reading DER Device Cert file /tmp/deviceCerts/certifiedKeyCert.der
May 10, 09:14:42: DER Device Cert file len:1767
May 10, 09:14:42: Intermediate Cert index:0 is /tmp/deviceCerts/certifiedKeyCaCert.der
May 10, 09:14:42: Reading DER Intermediate Cert file
May 10, 09:14:42: DER Intermediate Cert file len:1457
Command History
Version Description
Dell Networking W-Series Instant
Access Point 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.2.1.0-3.4 | CLI Reference Guide show log rapper | 341