Reference Guide

62 | User Messages Dell Networking W-Series Instant 6.4.0.2-4.1 | Syslog Messages Reference Guide
524027 Error decoding MPPE send-key (code = [code:%d])
Description: This shows internal debug messages.
524028 Invalid MPPE send-key length:[len:%d]
Description: This shows internal debug messages.
524030 Invalid Radius Code [radcode:%d]
Description: This shows internal debug messages.
524043 [string:%s]: FT mic=[string1:%s]
Description: This shows internal debug messages.
524044 AES-GCM key size should be either [key1:%d] or [key2:%d]
Description: This shows internal debug messages.
524046 Station UP failed for station [str:%s] [str1:%s]
Description: This shows internal debug messages.
524056 Invalid radius code
Description: This shows internal debug messages.
524057 Dropping the radius packet for stateful dot1x processing
Description: This shows internal debug messages.
524058 No Valid NAS IP dropping the request
Description: This shows internal debug messages.
524059 NAS IP address didn't match the NASIP attribute
Description: This shows internal debug messages.
524060 No Valid Calling Station ID dropping the request
Description: This shows internal debug messages.
524061 Could not create a new user entry
Description: This shows internal debug messages.
524062 Failed to add to the radius request list
Description: This shows internal debug messages.
524063 Dropping radius response to AP
Description: This shows internal debug messages.
524064 No matching request fot the response..dropping the pkt
Description: This shows internal debug messages.
524065 User was deleted before the response came in
Description: This shows internal debug messages.
524066 No dot1xctx for this response
Description: This shows internal debug messages.
524067 Failed to process EAP packet from backend
Description: This shows internal debug messages.
Table 19 User Error Messages
Message ID Message and Description