Users Guide

l Downlink speed —Indicates the WAN downlink speed in Kbps.
l Uplink load—Indicates the percentage of the WAN uplink currently utilized. The default value of 0 to indicates
that the downlink speed is unknown or unspecified.
l Uplink speed—Indicates the WAN uplink speed in Kbps.
l Load duration—Indicates the duration in seconds during which the downlink utilization is measured.
l Symmetric links—Indicates if the uplink and downlink have the same speed.
l WAN Link Status— Indicates if the WAN is down (link-down), up (link-up), or in test state (link-under-test).
Creating a Hotspot Profile
To create a hotspot profile:
(Instant Access Point)(config)# hotspot hs-profile <name>
(Instant Access Point)(Hotspot2.0 <name>)# asra
(Instant Access Point)(Hotspot2.0 <name>)# access-network-type <type>
(Instant Access Point)(Hotspot2.0 <name>)# addtl-roam-cons-ois <roam-consortium-OIs>
(Instant Access Point)(Hotspot2.0 <name>)# comeback-mode
(Instant Access Point)(Hotspot2.0 <name>)# gas-comeback <delay-interval>
(Instant Access Point)(Hotspot2.0 <name>)# group-frame-block
(Instant Access Point)(Hotspot2.0 <name>)# hessid <hotspot-essid>
(Instant Access Point)(Hotspot2.0 <name>)# internet
(Instant Access Point)(Hotspot2.0 <name>)# p2p-cross-connect
(Instant Access Point)(Hotspot2.0 <name>)# p2p-dev-mgmt
(Instant Access Point)(Hotspot2.0 <name>)# pame-bi
(Instant Access Point)(Hotspot2.0 <name>)# query-response-length-limit <integer>
(Instant Access Point)(Hotspot2.0 <name>)# roam-cons-len-1 <integer>
(Instant Access Point)(Hotspot2.0 <name>)# roam-cons-len-2 <integer>
(Instant Access Point)(Hotspot2.0 <name>)# roam-cons-len-3 <integer>
(Instant Access Point)(Hotspot2.0 <name>)# roam-cons-oi-1 <integer>
(Instant Access Point)(Hotspot2.0 <name>)# roam-cons-oi-2 <integer>
(Instant Access Point)(Hotspot2.0 <name>)# roam-cons-oi-3 <integer>
(Instant Access Point)(Hotspot2.0 <name>)# venue-group <group>
(Instant Access Point)(Hotspot2.0 <name>)# venue-type <type>
(Instant Access Point)(Hotspot2.0 <name>)# enable
(Instant Access Point)(Hotspot2.0 <name>)# end
(Instant Access Point)#commit apply
The hotspot profile configuration parameters are described in the following table:
Parameter Description
access-network-
type <type>
Specify any of the following 802.11u network types.
l private — This network is accessible for authorized users only. For example, home networks
or enterprise networks that require user authentication. The corresponding integer value for
this network type is 0.
l private-with-guest — This network is accessible to guest users based on guest authentication
methods. For example, enterprise networks that allow guest users with captive portal
authentication. The corresponding integer value for this network type is 1.
l chargeable-public — This network provides access to the Internet based on payment. For
example, a subscription-based Internet access in a coffee shop or a hotel offering chargeable
in-room Internet access service. The corresponding integer value for this network type is 2.
l free-public —This network is accessible to all without any charges applied. For example, a
hotspot in airport or other public places that provide Internet access with no additional cost.
The corresponding integer value for this network type is 3.
l personal-device — This network is accessible for personal devices. For example, a laptop or
camera configured with a printer for the purpose of printing. The corresponding integer value
for this network type is 4.
Table 51: Hotspot Configuration Parameters
Dell Networking W-Series Instant 6.2.1.0-3.4 | User Guide Hotspot Profiles | 263