Service Manual

virtual-controller-vlan
virtual-controller-vlan <virtual-controller-vlan> <virtual-controller-mask> <virtual-
controller-gateway>
no…
Description
This command configures a VLAN for the Virtual Controller.
Syntax
Parameter Description Range Default
virtual-
controller-vlan
<virtual-
controller-vlan>
Associates a VLANID with the Virtual Controller.
— —
<virtual-
controller-mask>
Configures a subnet mask for the Virtual
Controller.
— —
<virtual-
controller-
gateway>
Configures a gateway for the Virtual Controller. — —
no…
Removes the configuration. — —
Usage Guidelines
Use this command to configure VLAN, Netmask, and Gateway for the Virtual Controller.
Example
The following example configures VLAN for the Virtual Controller:
(Instant Access Point)(config)# virtual-controller-vlan <Vlan-ID> <Mask> <Gateway-IP-address>
(Instant Access Point)(config)# end
(Instant Access Point)# commit apply
Command History
Version Description
Dell Networking W-Series Instant Access
Point 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.2.1.0-3.4 | CLI Reference Guide virtual-controller-vlan | 427