Concept Guide

Parameter Description Range Default
reauthentication
Select this option to force the
client to do a 802.1X
reauthentication after the
expiration of the default timer
for reauthentication. (The
default value of the timer is
24 hours.) If the user fails to
reauthenticate with valid
credentials, the state of the
user is cleared.
If derivation rules are used to
classify 802.1X-authenticated
users, then the
reauthentication timer per
role overrides this setting.
— disabled
reload-cert
Reload Certificate for 802.1X
termination. This command is
available in enable mode only.
— —
server
Sets options for sending
authentication requests to the
authentication server group.
server-retry <number>
Maximum number of
authentication requests that
are sent to server group.
0-3 3
server-retry-period <seconds>
Server group retry interval, in
seconds.
5-65535 5
seconds
server-cert <certificate>
Server certificate used by the
controller to authenticate
itself to the client.
— —
termination
Sets options for terminating
802.1X authentication on the
controller.
eap-type <type>
The Extensible Authentication
Protocol (EAP) method, either
EAP-PEAP or EAP-TLS.
eap-
peap/
eap-tls
eap-
peap
enable
Enables 802.1X termination
on the controller.
— disabled
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa authentication dot1x | 29