Concept Guide

2237| vrrp Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
When the timer is triggered, it
delays the router for a specified
period of time before taking
over the master router. In the
mean time, if there is an
advertisement from another
VRRP master (existing master),
the router stops the timer and
does not transition to master.
priority
Defines the priority level of the
VRRP instance for the controller.
This value is used in the election
mechanism for the master.
A higher number specifies a
higher priority.
The default priority setting is
adequate for most networks.
100 1-255
shutdown
Administratively shutdown VRRP.
When down, VRRP is not active,
although the controller
maintains the configuration
information.
To start the VRRP instance, use
no shutdown.
— enabled
(VRRP is
down)
tracking interface
Configures VRRP tracking based
on Layer-2 interface state
transitions. You can configure
this on Fast Ethernet or Gigabit
Ethernet interfaces.
You can track a combined
maximum of 16 VLAN and
Layer-2 interfaces.
— —
<slot>/<module>/<port>
Port interface in <slot>/<-
module>/<port> format.
— —
sub
Decreases the priority of the
VRRP instance by the specified
amount. When the interface
comes up again, the value is
restored to the previous priority
level.
The combined priority and
tracking vales cannot exceed
255.
If the priority value exceeds 255,
the controller displays an error
message.
0-255 —