Concept Guide

Parameter Description Range Default
rf-band
For APs that support both a
and b/g RF bands, RF band in
which the AP should operate:
l g = 2.4 GHz
l a = 5 GHz
a/g g
rtls-server
Enables the AP to send RFID
tag information to an RTLS
server.
— —
ip-or-dns
IP address or the DNS of the
RTLS server to which location
reports are sent.
— —
port
Port number on the server to
which location reports are
sent.
— —
key
Shared secret key. — —
station-message-frequency
Indicates how often packets
are sent to the server.
1-3600 30 seconds
include-unassoc-sta
RTLS station reporting
includes information for APs
and the clients that the AP has
detected. If you include the
include-unassoc-sta
parameter, the station reports
will also include information
about clients not associated to
any AP. By default,
unassociated clients are not
included in station reports.
— disabled
secondary-master
The secondary master
controller is configured to be
used when a RAPis not able to
reach the primary master
controller.
— —
session-acl
Session ACL configured with
the ip access-list session
command.
NOTE: This parameter
requires the PEFNG license.
— —
spanning-tree
Enables the spanning-tree
protocol.
— disabled
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap system-profile | 220