Concept Guide

217| ap system-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
lms-ipv6
In multi-controller ipv6
networks, specifies the IPv6
address of the local
management switch (LMS)—
the controller—which is
responsible for terminating
user traffic from the APs, and
processing and forwarding
the traffic to the wired
network. This can be the IP
address of the local or master
controller.
When using redundant
controllers as the LMS, set
this parameter to be the VRRP
IP address to ensure that APs
always have an active IP
address with which to
terminate sessions.
— —
lms-ping-interval
Specifies the interval at which
application level ping needs to
be sent to primary controller
to check the reachability.
Applicable only for RAP.
NOTE: If this parameter is
changed, UDP session
timeout on an intermediate
router which performs NATing
should be set accordingly. The
preferred timeout value is
(lms-ping-interval + 30sec).
10-60 seconds 20
seconds
lms-preemption
Automatically reverts to the
primary LMS IP address when
it becomes available.
— disabled
maintenance-
mode
Enable or disable AP
maintenance mode.
This setting is useful when
deploying, maintaining, or
upgrading the network.
If enabled, APs stop flooding
unnecessary traps and syslog
messages to network
management systems or
network operations centers
when deploying, maintaining,
or upgrading the network. The
controller still generates
debug syslog messages if
debug logging is enabled.
disabled