Reference Guide

325 | show dhcps config Dell Networking W-Series Instant 6.3.1.1-4.0 | CLI Reference Guide
show dhcps config
show dhcps config
Description
This command provides information about the DHCP scopes configured for a W-IAP.
Usage Guidelines
Use this command to view configuration details associated with the DHCP scopes enabled on a W-IAP.
Example
The following example shows the output of the show dhcps-config command:
Distributed DHCP Scopes
-----------------------
Name Type VLAN Netmask Default Router DNS Server Domain Name
---- ---- ---- ------- -------------- ---------- -----------
dhcp-11 Distributed,L2 11 11.11.11.0 255.255.255.0 0.0.0.0
Lease Time IP Address Range Client Count DHCP Option Reserve First Reserve Last
---------- ----------------- ----------- ------------- ------------ ------
43200 5 None
Branch ID Branch Netmask Branch Router
--------- -------------- -------------
Other DHCP Scopes
-----------------
Name Type VLAN Network Netmask Exclude Address Default Router
---- ---- ---- ------- ------- --------------- --------------
dhcp-12 Local 12 12.12.12.0 255.255.255.0 0.0.0.0 0.0.0.0
DNS Server Domain Name Lease Time DHCP Relay DHCP Relay Servers
---------- ----------- ---------- ---------- ------------------
0.0.0.0 43200 OFF 0.0.0.0
DHCP Option82 DHCP Option
------------ ----------------
None
The output of this command displays the following information:
Parameter Description
Name
Displays the name of the DHCP scope.
type
Displays the DHCP assignment modes. The current
release of Dell W-Instant supports the following DHCP
assignment modes.
l Distributed, L2
l Distributed, L3
l Local
l Local, L3
l Centralized, L2
VLAN
Indicates the VLAN ID assigned to DHCP scope.