Reference Guide

Dell Networking W-Series Instant Access Point 6.3.1.1-4.0 | Reference Guide System Messages | 27
Chapter 3
System Messages
Emergency Messages
Alert Messages
Table 10 System Emergency Messages
Message ID Message and Description
330203 MESHD process initialization failed.
Cause: MESHD process initialization failed possibly because the mesh-node is not
correctly provisioned.
Recommended Action: Re-provision the AP. Contact Dell technical support if this
problem persists.
330204 MESHD process exiting. No MESH role was specified.
Cause: No MESH role was specified.
Recommended Action: Re-provision the AP. Contact Dell technical support if this
problem persists.
330205 MESHD process exiting. No MESH cluster profile was specified.
Cause: No MESH cluster profile was specified.
Recommended Action: Re-provision the AP. Contact Dell technical support if this
problem persists.
341008 [msg:%s]
Description: No description available.
Table 11 System Alert Messages
Message ID Message and Description
341007 [msg:%s]
Description: No description available.
341091 [func:%s]: [line:%d]: out of memory.
Description: The AP is upgrading image from awc.
341276 Could not program ACL = [acl:%d] to datapath.
Description: Datapath ACL programming failed.
341286 Could not download the required file, reason [reason:%s].
Description: Could not download the required file.
341287 Managed mode: Could not apply the config fetched from server [reason:%s], error code
[error_code:%d].
Description: Could not apply the configuration fetched from server.