Concept Guide
958| show ap arm client-match Pending Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Signal (S/T/A)
The output of this column shows the following values:
l S: Radio signal strength of the source AP
l T: Radio signal strength of the target AP
l A: Radio signal strength of the AP that the client is actually associated to
Band (S/T/A)
The output of this column shows the following values:
l S: Radio frequency band of the source AP (e.g. 2.4GHz and 5GHz)
l T: Radio frequency band of the target AP
l A: Radio frequency band of the AP that the client is actually associated to
Radio BSSID (S/T/A)
The output of this column shows the following values:
l S: MAC address of the source AP radio
l T: MAC address of the target AP radio
l A: MAC address of the AP radio that the client is actually associated to
APName (S/T/A)
The output of this column shows the following values:
l S: Name of the source AP
l T: Name of the target AP
l A: Name of the AP that the client is actually associated to
Related Commands
Use the following command to enable the client match feature:
l rf arm-profile client-match
The following commands display statistics for the client match feature:
l show ap arm client-match probe-report
l show ap arm client-match neighbors
l show ap arm client-match restriction-table
l show ap arm virtual-beacon-report
l show ap arm client-match unsupported
l show ap arm client-match summary
Command History
Version Description
ArubaOS 6.5 Command Introduced