Concept Guide

715| rf arm-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
scan-interval
scanning
video-aware-scan
voip-aware-scan
Description
This command configures the Adaptive Radio Management (ARM) profile.
Syntax
Parameter Description Range Default
<profile>
Name of this instance of the
profile. The name must be 1-
63 characters.
— “default”
160MHz-support
Allows ARM to determine the
channel bandwidth on the
160 MHz frequency.
— none
auto
Assigns 160 MHz channel
bandwidth. The selection of
channel bandwidth is
automatic; this can either be
contiguous or non-
contiguous.
— —
contiguous-only
Assigns contiguous 160 MHz
channel bandwidth.
— —
non-contiguous-only
Assigns non-contiguous 160
MHz channel bandwidth.
— —
none
Do not assign 160 MHz
channel bandwidth. This is
the default value.
— —
40MHz-allowed
-bands
Allows ARM to determine if
40 MHz mode of operation is
allowed on the 5 GHz or 2.4
GHz frequency band only, on
both frequency bands, or on
neither frequency band.
All/None/
a-only/g-only
a-only
All
Allows 40 MHz channels on
both the 5 GHZ (802.11a)
and 2.4 GHZ (802.11b/g)
frequency bands.
— —
None
Disallows use of 40 MHz
channels.
— —