Concept Guide

show ap spectrum monitors
show ap spectrum monitors
Description
This command shows a list of APs terminating on the controller that are currently configured as spectrum
monitors or hybrid APs
Syntax
No parameters
Examples
The output of this example shows that the 802.11a radio on a spectrum monitor named ap123 is sending
spectrum analysis data to a client with the IP address 10.240.16.177.
(host)#show ap spectrum monitors
List of Sensors
---------------
AP name Group AP Type Phy Band Channel Mode Client IP
Subscribe Time
------- ----- ------- --- ---- ------- ---- -----
--------------
00:24:6c:c0:0c:89 default 105 G 2GHz 1 Access Point
10.240.16.177 2011-01-21 07:09:32 AM
00:24:6c:c0:0c:89 default 105 A 5GHz 44+ Access Point 10.240.16.177
2011-01-21 07:17:57 AM
00:24:6c:c7:d6:1c default 93 A 5GHz - Spectrum Monitor 10.240.16.177
2011-01-21
07:18:22 AM
The output of this command includes the following information:
Column Description
AP name Name of an AP configured as a spectrum monitor or hybrid AP
Group Name of the spectrum device’s AP group
Ap Type
the AP model number
Phy
The radio’s PHY type. Possible values are A for 802.11a and G for 802.11b/g,
Band Spectrum band that the spectrum monitor or hybrid AP radio s currently
monitoring.
Mode This column shows whether the device is an access point configured as a
hybrid AP, or a spectrum monitor.
Client IP IP address of the client to which the spectrum monitor or hybrid AP is
sending data.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap spectrum monitors | 1319